How do I set Humanforce to Kiosk Mode?

The below instruction will will run you through how to setup your Humanforce into Kiosk Mode. Humanforce has two modes, Employee Self-Service (ESS) and Kiosk mode. The difference between the two is that ESS will give you access to all of Humanforces functionality, where Kiosk mode allows you to limit the access of what you can do in this mode. This is helpful on clock in devices where you just want the employee to clock in and out. 

Check out Navigation Manger to see what you can limit. 

The below instructions will run you through how to setup your Humanforce into Kiosk mode.

1. Open a browser (ie. Google Chrome, Microsoft Edge, etc.)

2. Go to your instance (ie. https://testonly.humanforce.com/)

3. Login to an administrator account.
   
4. Under the Admin Menu select System Config > Override Current Location Settings.
5. At this stage you will need to change the current Location for this terminal by selecting your location from the drop-down box. 
   
6. Press Apply. 

Your Humanforce is now in Kiosk Mode. 

NOTE: This will only apply on the device this is applied to. You will have
to apply this to each device you want it on.